McAfee DLP Prevent hardware appliances Prepare the McAfee® Data Loss Prevention Prevent (McAfee DLP Prevent) hardware appliance for deployment, installation, and integration in the network. Supported appliance models and featuresDepending on the model, the McAfee DLP Prevent appliance is a 1-U or 2-U rack mount chassis. You must be using a supported appliance model according to how you want to use the product. Check your shipmentEach product ships with all the items needed to install the appliance on a network. Check the contents list to verify that you received all items. Technical specificationsBefore you set up the McAfee DLP Prevent appliance, review the hardware specifications. Rack-mounting considerations McAfee DLP Prevent hardware must be rack-mounted properly to ensure safe configuration. Power redundancyMcAfee DLP Prevent appliances with more than one power supply must be configured to provide redundancy while operating at nominal power. Use two electrical outlets that are on different circuit breakers to achieve additional protection. FCC compliance McAfee DLP Prevent hardware has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 16 of the Federal Communications Commission rules. Any modifications to McAfee DLP Prevent equipment, unless expressly approved by the party responsible for compliance, might void authority to operate the equipment. Safety compliance guidelines McAfee DLP Prevent appliances must be operated in compliance with strict safety guidelines.